Genkinger, Inc.

Motor-Driven Warp Beam Lift Truck EE-KHUR20...25

With tube grippers, for inserting full warp beams in weaving machines

Very agile vehicle with a loading capacity of 2000 kg or 2500 kg which is operated by one person and which is hardly longer than the warp beam. It permits turning on the spot and can therefore be easily handled in narrow aisles.
Since the “legs” of truck do not have to go round the weaving machine, it is suitable for different weaving machine types.
The automatic motion sequence of the supporting rollers during the lowering procedure and the side-shift facility of the warp beam make it easier to position the warp beam in the warp beam support.
Height-adjustable tube grippers are very helpful for warp beams with bearing by beam drive adapters in order to meet exactly the center of the warp beam with the axle.
The vehicle can be operated with a battery change system for applications without sufficient charging time.


  • Suitable for sensitive warp material
  • Short design
  • Independent of weaving machine dimensions where the “legs” of the transport truck may have to go round
  • One-person operation
  • Optionally available with driver's platform which can be folded up for longer transport routes

Data required in case of inquiry/order

  • Weaving machine type
  • Nominal width of the weaving machine
  • Min. and max. warp beam diameter
  • Min. and max. warp beam tube diameter

version 2500 kg equiped with a change arm system

EE-KHUR 20 in transport position

mounting the lower beam

the inductively guided version automatically automatically follows the guide wire installed in the floor