Genkinger, Inc.

Warp Beam Lift Truck with Harness Mounting Device KHUR12 GEV

With tube grippers, for inserting drawn-in full warp beams in weaving machines

The drawn-in warp is, together with the harness, very gently taken over by the storage truck TLS and transported to the weaving machine. An automatic retraction device secures the harness in the transport position and guarantees safety against overturning of the device.
It is a very agile vehicle which is operated by one person and which is hardly longer than the warp beam. It permits turning on the spot and can therefore be easily handled in narrow aisles.
Since the “legs” of truck do not have to go round the weaving machine, it is suitable for different weaving machine types.
The automatic motion sequence of the supporting rollers during the lowering procedure and the lateral side-shift facility of the warp beam make it easier to position the warp beam in the warp beam support. Furthermore, the vehicle is steerable during the crosswise drive.
Due to its large central running wheels, the vehicle can be very easily shifted.
Height-adjustable tube grippers are very helpful for warp beams with bearing by beam drive adapters in order to meet exactly the center of the warp beam with the axle.

Advantages

  • Suitable for sensitive warp material
  • Automatic transport securing device of the harness mounting device
  • Short design
  • Independent of weaving machine dimensions where the “legs” of the transport trucks max have to go round
  • Turns easily on the spot
  • One-person operation in the vehicle middle

Data required in case of inquiry/order

  • Weaving machine type
  • Nominal width of the weaving machine
  • Min. and max. warp beam tube diameter
  • Number of harness frames

the empty truck can be well manoeuvred at a pushing handle in comfortable height

favourable harness mounting with precise lowering in harness range

narrow transport position, short length. The truck is ready for mounting into the weaving machine.